Monthly Archives: November 2019

TULSA Alignment Service

Your car might have an alignment problem if: it drifts or pulls to one side, your steering wheel is off center, you have uneven tire wear or your car doesn't feel like it handles right. When all of a vehicle's wheels are lined up exactly with each other, your wheels are in alignment. Running into potholes around TULSA and smacking a curb or other object are great ways to knock your car out of alignment. Then, one or more of your wheels starts pulling in a slightly different direction and the problems begin.There are several things involved in an alignment check at Cartec Automotive Service. First, there's an inspection of the steering and suspension systems - their components should be checked to see if anything's bent or broken. Then the tire condition needs to be inspected. From there, the vehicle is put on an alignment rack and an initial alignment reading is taken. If all four wheels are adjustable, they are lined up perfectly parallel with the vehicle's center line. If t ... read more

Categories:

Alignment

Need a New Battery? Call Cartec Automotive Service Today

Hello TULSA drivers! Need a new battery? There is a good chance that you do – 70% of batteries need to be replaced within four years. As your battery discharges and then recharges as you drive around TULSA, bits of the surface of the battery plates disintegrate. As this process continues over a few years, the alternator has to work harder to supplement the battery charge. Over time, enough of the battery is damaged that it can no longer hold a charge and it needs to be replaced. This also speeds up wear on the alternator.Your Cartec Automotive Service service advisor can help you determine the right vehicle replacement battery for the way you drive around TULSA, as well as the OK climate and durability needs.Contact Cartec Automotive Service for information on battery replacement.Give us a call. Cartec Automotive Service 5609 East 41st Street TULSA, OK 74135 918

Categories:

Battery

Fuel Injection: It Keeps Getting Better for TULSA Drivers

TULSA residents know that engines need to burn fuel to operate. Fuel is pumped from your fuel tank to your vehicle engine where it is squirted—or injected—into your engine's cylinders. This is the function of the fuel injectors.There are two ways to inject fuel into an engine. Fuel needs air to burn, so in the first method, fuel is injected into a port and allowed to mix with airbefore it is drawn into the cylinders. In the second method, fuel is injected directly into the cylinders and mixes with air after it enters the vehicle engine.Direct injection engines burn fuel more efficiently than conventional vehicle engines. Some models can deliver the power of a V8 with the economy of a V6.For example, in one family of engines, the conventional version (a V6) delivers about 250 horsepower. The direct injection version delivers over 300 horsepower and gets about the same gas mileage. The turbocharged version delivers 350 horsepower.Why ... read more

Categories:

Fuel System

No Fueling! (Fuel Filler Location)

If you've ever gotten in an unfamiliar vehicle, maybe a rental car, you may have pulled up to the gas pump and wondered, "Which side is the fuel filler on?" Here's a tip for you.  There is usually a little arrow on the instrument panel near the fuel gauge that points to the side where the fuel filler is.  But why are the fuel fillers not all on the same side, anyway? There are lots of reasons.  At one time, many manufacturers tried putting them in an easy-to-reach spot: in the center of the vehicle's rear end.  Some even hid them behind a hinged license plate door.  Cool place, but it turned out not to be a good idea.  When a vehicle with a fuel filler in the rear was hit by another vehicle from behind, it was much more prone to catch fire and explode. Safety regulations now dictate that the fuel filler doors be placed within crumple zones and away from where they can drip fuel on hot exhaust pipes or near electrical connections.  But why do manufactu ... read more